Before starting, make sure your device is completely powered off and unplugged. Use the proper tools if needed (usually included in the package). Do not force anything—if you're unsure, seek help from a professional.
This tutorial will guide you in detail how to remove the Apple A1953 / MacBook Pro 15" Touch (Mid 2018-2019) A1990 battery.
Step 1
Remove the screws
Use a Pentalobe screwdriver to remove the bottom case screws
Step 2
Unscrew the touch panel cable
Unscrew the touch panel cable (if there is a gasket,use a hexagonal screwdriver to remove the screw and take out the gasket)
Step 3
Remove the cable
Unscrew the battery cable connector and gently pull out the cable.Unscrew the other end connector and take out the cable.
Step 4
Remove the screws
Remove the battery interface screws and gently fold up the interface
Step 5
Remove the motherboard screws
Remove the motherboard screws
Step 6
Pry open the battery
Use a shovel to gently pry the battery loose.You can add alcohol or glue remover to dissolve the glue.
Step 7
Install new battery
Gently pry up the motherboard, slowly push the battery copper sheet in, and tighten the screws